Surhan Cement, Uzbekistan
DCS · 4,200 signals · 10 cabinets
Process control for a 1,000 t/day cement line: 7 operator and 6 field stations on the HOLLiAS MACS-K platform.
BAS LLC · Bukhara · since 2018
BAS unites design, equipment supply, industrial control systems, electrical installation and commissioning into one working solution — with a single centre of responsibility for the result across the asset's entire lifecycle.
What we do
Design and deployment of process control systems: from field level and control cabinets to SCADA, MES integration and IEC 62443 cybersecurity.
DCS · SIS · PLC · SCADA · HMI · Historian
Weichai diesel and gas-piston power plants — from backup power to autonomous generation and energy complexes: synchronization, ATS, SCADA monitoring, service.
12–4750 kW · open · containerized · mobile
Design and modernization of power, metallurgy and mining facilities: 3D scanning, information models, CFD verification before CAPEX, water circulation systems.
BIM · P&ID · 3D scanning · CFD · digital twin
Electrical installation, assembly of panels and control cabinets, cable routes, PLC/SCADA programming, factory and site testing, commissioning and client staff training.
Electrical · Software · Installation · FAT/SAT · Commissioning
Turnkey construction of photovoltaic power plants and installation of solar tracking systems: design, supply and installation of modules, trackers and inverters, commissioning and grid connection.
PV · trackers · inverters · installation · commissioning
We also do
Why BAS
One partner is accountable for the result at every project stage and across the whole lifecycle.
A unified architecture and well-tuned system interfaces cut timelines and cost.
BAS, HollySys and Weichai solutions are proven by real projects in many countries.
Aligned design, equipment supply and turnkey commissioning — one plan, one team.
Standard solutions, factory tests and pre-configured setups deliver a predictable start-up.
24/7 service, remote diagnostics, spare parts and modernization programs.
How we work
Every stage ends with a concrete deliverable — transparent steps, managed timelines and quality control throughout the project.
→ minutes and step plan
→ input data package
→ survey report
→ concept diagram
→ proposal, budget and schedule
→ design documentation
→ equipment and software
→ installed systems
→ handover acts, training
→ SLA and service plan
Projects
DCS · 4,200 signals · 10 cabinets
Process control for a 1,000 t/day cement line: 7 operator and 6 field stations on the HOLLiAS MACS-K platform.
26,000 DCS I/O · 4,000 SIS I/O
Integrated control and safety shutdown system: 17 units, 220 cabinets, open protocols.
2 stations · ~200 signals per unit
DCS and ESD for gas filling stations — a single control and safety platform.
3 gas units · 25,000 running hours
Gas-piston power plant for an industrial site: islanded mode, BAS SCADA monitoring.
8×16M33 · 9.6 MW · Prime Power
Weichai energy complex for a data centre, commissioned in 2023.
buildings · I&C · fire alarm
Full scope of works: process equipment, cable lines, explosion-proof safety systems.
Metran instruments · shops 1–3
I&C installation and commissioning, field heated cabinets, flame detectors, anti-corrosion protection.
LED sections · Traffic Server · cabinets
Full cycle: assembly, installation, programming of traffic control modes and commissioning.
110/35/6 kV substation · 220 kV OHL · 31 km
Installation of a substation and overhead power lines for the Uchkun oil-shale processing complex. Client — Enter Engineering.
Double-circuit 110 kV OHL · 41 km
Construction of a double-circuit 110 kV overhead line from Hamza-3 to Samontepa substation and substation installation. Client — Makhsusenergogaz JSC.
6 kV OHL · 4.5 km
Construction of a 6 kV overhead line from Samontepa 110/6 kV substation to CS-1-110. Client — Makhsusenergogaz JSC.
foundations · 27 m masts · 32 m towers
Earthworks, equipment installation on foundations, lightning rods and 27 m masts, 32 m radio towers (307.5 km). Client — Trubodetal (MNGM JSC).
250 MW · Alat district
Construction, installation and electrical works at a 250 MW solar photovoltaic plant in the Alat district, Bukhara region. Client — Amirbek Shans Plyus LLC.
35 kV OHL · 24.2 km
Installation of a 24.2 km, 35 kV high-voltage line from the Urtabulok-1,2 line to CS-2 Chulkuvar 35/6 kV substation. Client — Makhsusenergogaz JSC.
internal lines · substation
Reconstruction of internal power lines and installation of a substation with equipment. Client — SPESTEXNO STROY LLC.
power lines · equipment
Construction of the new Amu-Bukhara 1 pumping station: line installation and equipment setup. Client — SPESTEXNO STROY LLC.
Industries we serve
On site
Ecosystem
DCS / SIS / PLC / SCADA / MES platform for digital plant integration.
90,000+ projects · 60+ countries
Learn moreEngines, generator sets and industrial power.
12–4750 kW · 150 countries
Learn moreHeavy industrial engineering: power, metallurgy, mining.
EPC · BIM · CFD
Learn moreInstallation, software and commissioning at site level.
20+ years · 400+ projects
Learn moreClients and project partners
We work as a subcontractor for divisions of Uzbekneftegaz JSC and organizations of Uztransgaz JSC.
Contacts
Tell us about your site — we'll propose an optimal solution architecture, a commercial proposal and an implementation schedule.